get in touch

Glass Fabrication · Coral Springs, FL

Your South Florida Glass Fabrication Partner

PGS cuts, edges, tempers, laminates, and prints architectural glass under one roof in Coral Springs. You get SGCC-certified safety glass, tighter control of lead times, and one point of contact from quote to delivery.

Fabrication capabilities

Complete Fabrication Under One Roof

From raw lite to finished, labeled unit, every step happens in our Coral Springs factory. Fewer handoffs means fewer delays, fewer errors, and one team accountable for your order.

Cutting & Sizing

Custom cuts and shapes to your cut list or shop drawings, including intricate patterns.

Edgework & Polishing

Flat polished, hand polished, seamed and mitered edges for exposed or framed applications.

Tempering

SGCC-certified heat-treated safety glass for code-compliant glazing in high-traffic areas.

Laminating

EVA and SentryGlas interlayers for safety, security, sound control, and overhead glazing.

Drilling, Notching & Hardware Prep

Custom-drilled holes, notches and cutouts to suit the glass and hardware.

Decorative Finishing

Ceramic and UV digital printing, back-painting, and acid-etched glass for color, branding, and privacy.

Glass types

The Glass Your Spec Calls For

Glass panel on the roller bed of the PGS tempering line

Tempered Glass

Heat-treated to be several times stronger than annealed glass, tempered glass breaks into small, blunt pieces if impacted. It is the code-compliant choice for doors, sidelites, showers, railings and any high-traffic glazing.

  • SGCC-certified safety glazing
  • Thermal stress resistance for demanding conditions
  • Full fabrication before tempering: cut, edged, drilled and notched to spec
Glass panel on the loading bed of the lamination machine at PGS in Coral Springs, Florida.

Laminated Glass

Two or more lites bonded with a high-strength interlayer stay intact even when broken. Choose EVA for interior and decorative work, or SentryGlas for structural railings, overhead glazing, and higher post-breakage strength.

  • Safety and security: glass stays in the opening
  • Sound reduction for offices, hospitality and healthcare
  • Built to your thickness, size and performance requirement
  • Applications: stair and balcony rails, storefront and curtain wall, interior partitions, overhead and skylights
Ceramic-printed glass panels depicting a Buddha figure, a hummingbird and vivid orange flowers.

Digital Printed Glass

Two in-house print processes cover everything from façades to feature walls.

Ceramic printing. Ceramic inks are fused into the glass during tempering, so the print becomes part of the surface and won’t fade, peel or scratch off. It’s the choice for exterior and high-wear glass.

UV printing, flat, or textured. Our UV-LED printer lays down high-resolution full color, including raised textures you can feel, for feature walls, partitions and retail.

  • Logos, branding, custom artwork and photography
  • Opacity gradients for privacy and solar shading
  • Frit-style and bird-friendly patterns for façades (ceramic)
  • Applications: curtain wall and spandrel, feature walls, partitions, retail, tabletops, showers and backsplashes

Need Privacy Glass for Your Project?

Pair custom-fabricated glass with PGS privacy glazing options, including switchable glass, integral blinds, and observation panels, to meet the needs of different openings on the same project.

Edgework and specs

Specs at a Glance

Flat Polished

Best for: Exposed edges on railings, tabletops, frameless showers
Hand-polished glass edge following the curved outline of a panel.

Hand Polished

Best for: Shapes and curves where a machine edge can’t reach

Seamed glass edge with narrow matte chamfers and an as-cut center face.

Seamed

Best for: Framed or glazed-in lites; safe handling edge
Mitered glass edge with an angled cut through the full thickness of the panel.

Mitered

Best for: Corner joints and display or furniture glass
SpecValue
Clear tempered5/32″, 3/16″, 1/4″, 3/8″, 1/2″
Low-iron tempered3/16″, 1/4″, 3/8″, 1/2″
Other tempered3/16″ grey; 1/4″ and 3/8″ acid-etched
Laminated interlayersEVA (.030, .060, .090) and SGP (.060, .090)
Laminated makeups5/16″ to 1″ overall
Minimum laminated size12″ × 12″
Customer-supplied glassWe can laminate glass you provide
Ceramic printingUp to 60″ wide
UV printing (flat and textured)Up to 72″ × 120″
CertificationsSGCC (tempered and laminated)

Don’t see your spec? Send us your drawings and we’ll confirm feasibility.

Who we serve

Built for the People Who Build

Glazing Contractors

Lites that fit the first time

Fabricated to your cut list with consistent edgework and hardware prep, labeled, and ready to install. One call covers tempered, laminated, and printed glass.

Architects & Specifiers

Specify it once, get it as drawn

SGCC-certified safety glass, SentryGlas structural laminates, and permanent ceramic printing for façades, spandrel, and feature walls. We'll support your submittals.

GCs & Designers

Fewer vendors, fewer delays

Decorative, safety, and switchable glass from one factory keeps your schedule in one place and your punch list short.

Glass production at the Privacy Glass Solutions facility in Coral Springs, Florida

Why Fabricate with PGS

Factory-direct pricing.

No middleman markup between fabricator and your job.

Quality you can verify.

Every panel is inspected; tempered and laminated products carry SGCC certification.

Speed.

In-house tempering and laminating means your order isn't waiting in another shop's queue.

Real people.

A dedicated fab team you can call, not a ticket number.

How ordering works

From Drawing to Delivery in Four Steps

1. Send your specs.

Upload drawings, a cut list, or a photo of the sketch. Include glass type, thickness, edge, and holes.

2. Get your quote.

We confirm feasibility, flag anything that won't temper or laminate as drawn, and price it.

3. Approval and fabrication.

Cutting, edgework, tempering, laminating, and printing all happen in our Coral Springs factory.

4. Inspect and deliver.

Each lite is checked, labeled to your mark numbers, and packed for pickup or delivery.

Frequently Asked Questions

Fabrication FAQs

Yes. Our tempered and laminated glass is certified by the Safety Glazing Certification Council (SGCC).

EVA suits interior partitions and decorative laminates. SentryGlas is stiffer and stronger after breakage, so it is preferred for structural railings, balconies and overhead glazing. Tell us the application and we’ll recommend one.
Yes. All holes, notches and cutouts are made before tempering, since tempered glass can’t be cut afterward. Send hardware specs and we’ll locate them.
Ceramic printing is our option for exterior applications. The ceramic ink fuses to the glass during tempering. We also offer flat and textured UV printing for applications such as interior partitions, feature walls and retail displays.
Glass type, thickness, dimensions, quantity, edge finish and any holes or notches. Drawings or a cut list speed things up.

Samples, mockups, or prototypes may be appropriate when appearance, operation, interfaces, or an unfamiliar configuration must be evaluated before production. The required level of review depends on the project.

Yes. Include the glass type, thickness, dimensions and any existing fabrication details so we can review it for the intended laminated makeup.
Maximum panel size depends on the glass type, thickness and processes required. Send your finished dimensions and let us know whether the glass needs tempering, lamination, printing or hardware cutouts.
Lead time depends on the glass makeup, quantity and fabrication required. Include your required date and whether you need pickup or delivery so we can review timing with your quote.

Have a Job on the Board? Let's Price It.

Innovative privacy and specialty glass solutions engineered for the way spaces need to perform.

Stay Informed

Get PGS news, product updates, project highlights, and Daylight Opening, our monthly industry newsletter.

* indicates required

Privacy Glass Solutions © 2026  |  All Rights Reserved